Table of Contents
Advertisement
User Name and Password - Enter the User Name and Password provided by your
ISP. These fields are case sensitive. If you have difficulty with this process, please
contact your ISP.
If you choose " Dynamic IP", the router will automatically receive the IP parameters from
your ISP without needing to enter any parameters.
If you Choose "Static IP", the Static IP settings page will appear, shown in Figure 3-8:
Note:
The IP parameters should have been provided by your ISP.
IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0
Default Gateway - Enter the gateway into the box if required.
Primary DNS - Enter the DNS Server IP address into the boxes if required.
Secondary DNS - If your ISP provides another DNS server, enter it into this field.
Click the Next button, then you will see the Finish page:
After finishing all configurations of basic network parameters, please click Finish button
to exit this Quick Setup.
TL-R860
Figure 3-7 Quick Setup - PPPoE
Figure 3-8 Quick Setup - Static IP
Figure 3-9 Quick Setup - Finish
- 10 -
Cable/DSL Router User Guide
Advertisement
Table of Contents
