Rear Windows - GMC Sierra 2011 Owner's Manual

Crew Cab Shown
If the vehicle has power windows,
controls are located on each door.
The driver door has a switch for the
passenger and rear windows as
well. The power windows will work
when the ignition has been turned to
ACC/ACCESSORY or ON/RUN or
when Retained Accessory
Power (RAP) is active. See
Retained Accessory Power (RAP)
on page 9 35.
Push the switch down to lower the
window, and pull up the front of the
switch to raise the window.
Express-down Windows
Vehicles with the express-down
feature allow the driver and front
passenger windows to be lowered
without holding the switch. Push the
switch down to the second detent,
then release, to activate the
express-down mode. The
express-down mode can be
canceled at any time by pulling up
on the front of the switch. To open
the window partway, push the switch
down to the first detent until the
window is at the desired position.
Window Lockout
(Window Lockout): If a crew
cab or extended cab vehicle has
power windows, the driver door
power window switch has a lockout
feature. This feature prevents the
rear windows from operating, except
from the driver position. Press the
switch to engage or disengage the
lockout feature. An indicator light on
the switch will come on when the
lockout feature is engaged, and will
go off when disengaged.
I n f o r ma t i o n P r o v i d e d b y :
Keys, Doors and Windows

Rear Windows

Power Sliding Rear Window
On vehicles with a power sliding
rear window, the switch is located in
the overhead console.
The power sliding rear window
works when the ignition has been
turned to ACC/ACCESSORY or ON/
RUN, or when Retained Accessory
Power (RAP) is active. See
Retained Accessory Power (RAP)
on page 9 35 for more information.
2-19