Download Print this page

High Valley 1600 rear-vent Owner's Manual

Hide thumbs Also See for 1600 rear-vent:

Advertisement

Quick Links

MODEL
M
1600 R
Safety, Installa on, Opera on, & Maintenance Guidelines
INSTALLER:
Leave this manual with the individual (s) responsible for opera ng this wood heater.
OPERATOR:
The Owner's Manual contains important safety, opera ng, and maintenance informa on.
Please read and understand the en re Owner's Manual before installing or opera ng this wood heater.
If you have ques ons please contact your High Valley Dealer for assistance.
If this wood heater is not properly installed, a house fi re may result.
For your safety, please carefully read and follow the installa on direc ons. Contact the local Building Inspector,
Fire Offi cial, or other Authority Having Jurisdic on (AHJ) about code requirements, restric ons, and installa on
inspec on in your area. The AHJ can advise you if you are required to obtain a permit before installa on.
Failure to follow these instruc ons can result in property damage, bodily injury, or even death.
1600
N
-V
P
Owner's Manual
DO NOT DISPOSE OF THIS MANUAL
SAVE THIS OWNER'S MANUAL FOR FUTURE REFERENCE
Safety No ce:
High Valley Stoves
185 Highway 201 │ Abbeville, SC 29620
-C
W
M
1600 T -V
Stoll
by
H
C
I
L

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1600 rear-vent and is the answer not in the manual?

Questions and answers

Summary of Contents for High Valley 1600 rear-vent

  • Page 1 The Owner’s Manual contains important safety, opera ng, and maintenance informa on. Please read and understand the en re Owner’s Manual before installing or opera ng this wood heater. If you have ques ons please contact your High Valley Dealer for assistance. SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE Safety No ce: If this wood heater is not properly installed, a house fi...
  • Page 2: Do Not Burn

    EPA validated CO and effi ciency values will be published in future revisions of this manual, and on the High Valley website, as they become available. This non-cataly c wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against federal regula ons to alter this se ng or otherwise operate this wood heater in a manner inconsistent with the opera ng instruc- ons provided in the owner’s manual.
  • Page 3 This manual describes the installa on, opera on, and maintenance of High Valley Stoves Model 1600 non-cataly c wood heater. This heater is cer fi ed to comply with the U.S. Environmental Protec on Agency’s crib wood emis- sion limits for wood heaters sold a er May 15, 2015.
  • Page 4: Fuel Storage

    Thank you for choosing a wood heater from High Valley Stoves. Safe and effi cient opera on of your wood heater depends greatly on proper installa on as outlined in this owner’s manual. If this wood heater is not properly installed, a house fi re may result.
  • Page 5 If you are planning to use an exis ng chimney and/ or hearth, many of the decisions have been made for you. Consult with your High Valley dealer before commi ng to a fi nal loca on and take full advantage of their experience.
  • Page 6 Chimneys that were constructed in homes built before the advent of oil and gas-fi red central hea ng systems were invariably constructed within the walls of the home, typically centrally located, and exited the roof at or near the ridge. The principals that applied then apply today.
  • Page 7 Your High Valley Model 1600 must be connected to either a factory-built Type HT chimney or to a masonry chimney with a fl ue liner of a construc on that meets all current code requirements. If the wood heater is to be connected to an exis ng chimney, have the chimney inspected prior to installing the wood heater by an NFI cer fi...
  • Page 8 • Special care must be exercised to ensure that all chimney clearances to combus bles meet current standards. • Exis ng chimneys should be inspected to ensure that clearances to combus bles are in compliance. • Factory-built chimney clearances are defi ned in the manufacturer's installa on instruc ons. •...
  • Page 9 1600 S 1600 T -V 1600 T -V Model 1600 Over All Width: 27” Flue Size: 6” Model 1600 Over All Depth: 30 ⅞” Firebox Volume: 2.7 cu. . Model 1600 Height with Pedestal: 30” Firebox Dimensions: 21" wide x 22" deep Weight: 514 lbs.
  • Page 10 NOTE: We strongly recommend that Cast Iron or Steel Legs be installed by your High Valley dealer. The body of the Model 1600 must be li ed at least 12 inches (12") and supported in this posi on while the legs are a ached. Your dealer has the material handling equipment and experience to handle the weight of the Model 1600.
  • Page 11 If you have concerns about handling the wood heater please contact your High Valley dealer for assistance. ○ Li the wood heater and gently set it in place. Do not drop the wood heater onto the fl oor protector. Do not slide the wood heater into posi on.
  • Page 12 An outside air inlet must be provided for combus on and be The wood heater must be anchored to the fl oor with bolts of unrestricted while the unit is in use. Use High Valley outside suffi cient size and length to penetrate the pedestal mount, air kit (P/N: AIRKIT).
  • Page 13 P -O CAUTION: H ALWAYS USE SAFE BURNING PRACTICES: NOTICE: Before ligh ng the wood heater for the fi rst me ensure that any inspec on required has been completed and passed by the local Building Inspector, Fire Offi cial, or This wood heater is designed and approved for the burn- other Authority Having Jurisdic on (AHJ).
  • Page 14 CAUTION: Before ligh ng your wood heater please See Page 20. read and/or re-read the safety informa on on Pages 2, 4 & During the fi rst stage of combus on 13, and elsewhere throughout this manual. Ensure that the keep the Air Control fully, or nearly fully, open to help drive wood heater has been installed according to the instruc- off...
  • Page 15 Some ashes may spill while removing them from the fi rebox. Contact your High Valley dealer or local chimney sweep if Ashes can be vacuumed up once they are proved to be com- you are uncertain how to inspect the ven ng system.
  • Page 16 The diff erence of a few hundredths of an inch of water column can spell the diff erence between poor performance and clean, effi cient burning. Your High Valley dealer or a chimney professional, using experience and all of the tools available to them, should be able to diagnose the problem and recommend solu ons.
  • Page 17 The Outside Air Kit a aches to the Pedestal Base op on only. The kit will not work with Cast Iron or Steel Legs. The op onal Outside Air Kit is available through your High Valley dealer. Part Number: AIRKIT The O/A kit mounts to the back of the pedestal, with the four (4) #8 x ½"...
  • Page 18 If the bill slips out easily the gasket needs to be replaced. Repeat the test around the perimeter of the Loading Door. A gasket kit is available from your High Valley dealer and includes silicone adhesive. Part Number: GSKDOR. Thoroughly remove all of the old silicone from the Loading Door before installing the new gasket.
  • Page 19 fl at on the baffl e before reinstalling the fl ue connector pipe. Use only OEM replacement parts or approved supplies. A par al list of replacements parts is included below. Contact your High Valley dealer or High Valley Stoves customer service for addi onal informa on about replacement parts. 1600 R...
  • Page 20 ̴ B Before ligh ng the fi rst fi re in your new wood heater, please Clean, effi cient combus on in your wood read the following informa on outlining the basic elements heater depends on burning well seasoned, good quality of clean wood combus on.
  • Page 21 B ̴ H Natural cord C ̴ F UL Standard wood does not come with a specifi ca on sheet like the 1618; the Standard for Wall Protectors, Floor Protectors, and building materials described in Appendix C. Manufactured Hearth Extensions, was adopted as a standard in 2011. UL- products can be made to strict, repeatable tolerances.
  • Page 22 Except to the extent provided by law, High Valley Stoves by Stoll makes no express warran es on its High Valley Stoves other than the warranty specifi ed herein. The dura on of any implied war- ranty is limited to dura on of the expressed warranty specifi...
  • Page 23 1600 High Valley Model: Serial Number: High Valley Dealer: Date of Purchase: Installed by: Installa on Date: Inspected by: Date of Inspec on: This facsimile of the Safety Label, which is a ached to the back of your Model 1600, is provided for the convenience of the owner, the Authority Having Jurisdic on, or any other inspector, who wishes to verify the contents of the label.
  • Page 24 NOTES: 185 Highway 201 │ Abbeville, SC 29620 www.highvalleystoves.com HL1650 ̴ Rev. 05/2015...

This manual is also suitable for:

1600 top-vent