Godrej ET – 4AHD1 User Manual page 64

Possible reasons are as followed:
1 The rewritable machine and the hard disk are shared the same data lines.
2 The data is too much. Please stop recording and backup.
3 The data exceeds the backup storage.
4 The backup equipment is not compatible.
5 The backup equipment is damaged.
(17) Alarm cannot be recessional.
Possible reasons are as followed:
1 The setting of the alarm is not correct.
2 The alarm output is turned on manually.
3 The input machine is damaged or the connections are not correct.
4 There are some problems for specific program edition, Please update the
program.
(18) Alarm is not working.
Possible reasons are as followed:
1 The setting of the alarm is not correct.
2 The connection of the alarm is not correct.
3 The alarm input signal is not correct.
4 A alarm is connected with two loops synchronously.
(19) The remote controller is not working,
Possible reasons are as followed:
1 The remote control distance is too far or the angle is too large.
2 The battery is used up.
3 The remote controller or the front panel of the recording machine is
damaged.
(20) The storage time is not enough.
Possible reasons are as followed:
1 The hard disk capability is not enough.
2 The hard disk is damaged.
61