Alarm Output; Ptz Control - Godrej ET – 4AHD1 User Manual

3.5.4 Alarm Output

The Alarm output function is only possible in ET – 16AHD2. You can use desktop shortcut
menu or click
<Main Menu> Æ <Alarm Function> Æ <Alarm Output> to enter the alarm output
interface.
<Configuration> Alarm is on according to the configuration.
<Manual> Click the all button and the according channel is alarming no matter the
channel in any state.
<Stop> Click the stop button and the according channel stops alarming no matter
the channel in any state.

3.5.5 PTZ Control

Operation interface is as followed. The functions include: PTZ direction control, step,
zoom, focus, iris, and setup operation, patrol between spots, trail patrol, boundary
scan, assistant switch, light switch, level rotation and so on.
„ Decoder A (B) line connects with AHD DVR A (B) line. The connection is
right.
„ Click <Main menu> Æ<System configuration> Æ<PTZ setup>
to set the PTZ parameters.
„ The PTZ functions are decided by the PTZ protocols.
<Speed> Set the PTZ rotation range. Default range: 1 ~ 8.
<Zoom> Click / button to adjust the zoom multiple of the camera.
<Focus> Click / button to adjust the focus of the camera.
<Iris> Click / button to adjust the iris of the camera.
Figure 3.9 PTZ Setup
13