Fussion 1800Sa/1800S Specifications; 2000 Mackie Designs Inc. All Rights Reserved. Printed In Italy - Mackie Fussion 1800S User Manual

Active sound reinforcement subwoofer system
Hide thumbs Also See for Fussion 1800S:
Table of Contents

Advertisement

FUSSION 1800SA/1800S SPECIFICATIONS

System Specifications
Frequency Range (–10 dB):
Frequency Response (–3 dB):
Maximum SPL (long term):
Maximum SPL (peak): 139 dB @ 1m (system)
Recommended Crossover Point:
Transducers
Low-Frequency Transducers—Two Each
Cone Diameter:
Voice Coil Diameter:
Nominal Impedance:
Power Handling:
Power Amplifiers
Low-Frequency Power Amplifier—Two Each
Rated Power:
Rated THD:
Audio Input/Output
Input Impedance:
Input Type:
Speaker Level Output (1800SA): EP4 female
Speaker Level Input (1800S):
Line Input Power
US:
Recommended Amperage Service:
AC Connector:
Europe:
Recommended Amperage Service:
AC Connector:
In-rush Current Protection:
Safety Features
(Provided by FUSSION full-range or mid-high speaker
systems only; no onboard controls in 1800SA)
RMS Limiting:
Thermal Protection:
1
Power handling for transducers is based on an AES long term power
testing standard conducted for 100 hours full power, free air.
38Hz-160Hz
40Hz-150Hz
136 dB @ 1m (system)
85Hz
18˝ (457mm)
4.0˝ (100mm)
8 ohms
800W rms (long term)
1
2000W continuous @ 4Ω
2500W peak @ 4Ω
< 0.03%
20k ohms (F1800SA)
4 ohms (F1800S)
Balanced differential
EP4 male
115V, 60Hz
12A recommended
3-pin Twistlock
250VAC, 20A male
230V, 50Hz
8A recommended
3-pin IEC
250VAC, 16A male
Transistor-based
Monitoring and limiting
of continuous RMS
output of amplifiers
Input stage shutdown,
auto-reset
Physical Properties
Enclosure:
18mm multi-layered birch wood
Enclosure Geometry:
Rectangular
Handles:
4 each aluminum/rubber grips
Mounting Methods:
Floor mount only
Height:
32.9˝ (836mm)
Width:
23.6˝ (600mm)
Depth:
23.6˝ (600mm)
Weight:
1800SA
145 lbs. (65.8kg)
1800S
106 lbs. (48.1kg)
23.6" (600mm)
FUSSION 1800
23.6" (600mm)
TOP
Disclaimer
Since we are always striving to make our
products better by incorporating new and improved
materials, components, and manufacturing methods,
we reserve the right to change these specifications at
any time without notice.
"Mackie," the "Running Man" figure, and
"FUSSION" are trademarks or registered trade-
marks of Mackie Designs Inc.
All other brand names mentioned are trade-
marks or registered trademarks of their respective
holders, and are hereby acknowledged.
©2000 Mackie Designs Inc.
All Rights Reserved.
Printed in Italy.
23.6" (600mm)
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fussion 1800saFussion 1800

Table of Contents