S410S Specifications - Mackie S410s User Manual

S410s SPECIFICATIONS

Acoustic Performance
Frequency Range (–10 dB)
Sensitivity
Max SPL long-term
Max SPL peak
Crossover Point
Woofer Loading
Input/Output
INPUT/THRU Type
Input Impedance (nominal)
Input Impedance (minimum)
Recommended Lowpass Filter (if using external
crossover)
Power Handling
Low-Frequency Section
Woofer Diameter
Voice Coil Diameter
Diaphragm Material Paper
Magnet Material
Construction Features
Basic Design
Material
Finish
Handles
Grille
40 Hz–400 Hz
9. dB @ 1 W/1 m
11 dB @ 1m
14 dB @ 1m
180 Hz, 1 dB/octave
Bass reflex
Neutrik Speakon™
8 ohms
.8 ohms @ 110 Hz
150 Hz, 4 dB/octave
750 watts rms continuous
000 watts peak
10.0 in/54 mm
 in/51 mm
Ferrite
Bass reflex
18 mm multi-layered plywood
Black paint
One on each side
Perforated metal with weather-
resistant coating
Physical Properties
Height
Width
Depth
Weight
Mounting Methods
The S410s cabinet has no rigging points and is
not suitable for flying. Never attempt to suspend
the cabinet by its handles.
Options
Casters
Disclaimer
Since we are always striving to make our products better by in-
corporating new and improved materials, components, and manufac-
turing methods, we reserve the right to change these specifications
at any time without notice.
"Mackie" and the "Running Man" figure are registered trademarks
of LOUD Technologies Inc.
All other brand names mentioned are trademarks or registered
trademarks of their respective holders, and are hereby acknowledged.
Need Help?
You can reach a technical support representative
Monday through Friday
from 7 AM to 5 PM PST at:
1-800-898-3211
After hours, visit www.mackie.com and click Support,
or email us at: techmail@mackie.com
©005-008 LOUD Technologies Inc.
All Rights Reserved.
8.0 in/71.1 cm
4.0 in/1.0 cm
5.0 in/.5 cm
95 lb/4.1 kg
Floor mount only.
Set of four casters for mounting on
the rear of the cabinet.
See Caster Installation instructions
on next page.
R
9