Optional Parts - Mitsubishi Electric PWFY-P-NMU-E-AU Engineering Manual

10. OPTIONAL PARTS

Optional Parts Line Up for the Indoor Unit
(A) Strainer (B) Heat insulation material
(A) Install the strainer at the water pipe inlet.
(B) This insulation is for exclusive use with the strainer. Wrap the strainer with the insulation after water
pipes are installed.
(C) These are analog input connectors. Cut the wire before using.
(D) Fix power source wiring to terminal bed box by using buffer bushing for tensile force. (Conduit or the like.)
Connect transmission wiring to transmission terminal bed through the knockout hole of terminal bed box using
ordinary bushing.
(E) Supplied only with the PWFY-P72NMU-E-AU. Install them at the strainer inlet.
(C) Connecter sets 2 (D) Washer
PWFY-P-NMU-E-BU/PWFY-P-NMU-E-AU (Sept. 2010)
2 (E) Expansion joint 2
*1
*1. PWFY-P72NMU-E-AU only
PWFY-25