Casio Privia PX-560M User Manual page 36

07: Chorus
Gives notes depth and breadth.
Parameter Value Ranges:
1 :LFO Rate (0 to 127)
Adjusts the LFO rate.
2 :LFO Depth (0 to 127)
Adjusts the LFO depth.
3 :LFO Waveform (Sin, Tri)
Selects the LFO waveform.
4 :Feedback (–64 to 0 to +63)
Adjusts the strength of feedback
5 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
6 :Polarity (–, +)
Inverts the LFO of one channel.
7 :Input Level (0 to 127)
Adjusts the input level.
8 :Dry Level (0 to 127)
Adjusts the level of the direct sound.
08: Flanger
Applies wildly pulsating and metallic reverberation to notes. Selects
the LFO waveform.
Parameter Value Ranges:
1 :LFO Rate (0 to 127)
Adjusts the LFO rate.
2 :LFO Depth (0 to 127)
Adjusts the LFO depth.
3 :LFO Waveform (Sin, Tri, Random)
Selects the LFO waveform.
4 :Feedback (–64 to 0 to +63)
Adjusts the strength of feedback
5 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
6 :Input Level (0 to 127)
Adjusts the input level.
7 :Dry Level (0 to 127)
Adjusts the level of the direct sound.
09: Tremolo
Shifts the volume of the input signal using an LFO.
Parameter Value Ranges:
1 :LFO Rate (0 to 127)
Adjusts the LFO rate.
2 :LFO Depth (0 to 127)
Adjusts the LFO depth.
3 :LFO Waveform (Sin, Tri, Tra)
Selects the LFO waveform.
4 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
5 :Dry Level (0 to 127)
Adjusts the level of the direct sound.
10: Auto Pan
Shifts the continual left-right panning of the input signal using an
LFO.
Parameter Value Ranges:
1 :LFO Rate (0 to 127)
Adjusts the LFO rate.
2 :LFO Depth (0 to 127)
Adjusts the LFO depth.
3 :LFO Waveform (Sin, Tri, Tra)
Selects the LFO waveform.
4 :Manual (–64 to 0 to +63)
Adjusts the pan (stereo position). –64 is full left, 0 is center, and
+63 is full right.
5 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
6 :Dry Level (0 to 127)
Adjusts the level of the direct sound.
11: Rotary
This effect is a rotary speaker simulator.
Parameter Value Ranges:
1 :Speed (Slow, Fast)
Switches the speed mode between fast and slow.
2 :Brake (Rotate, Stop)
Stops speaker rotation.
3 :Fall Accel (0 to 127)
Adjusts acceleration when the speed mode is switched from fast
to slow.
4 :Rise Accel (0 to 127)
Adjusts acceleration when the speed mode is switched from slow
to fast.
5 :Slow Rate (0 to 127)
Adjusts the speaker rotation speed in the slow speed mode.
6 :Fast Rate (0 to 127)
Adjusts the speaker rotation speed in the fast speed mode.
7 :Vibrato/Chorus (Off, V1, C1, V2, C2, V3, C3)
Selects the vibrato (V) and the chorus (C) type.
8 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
9 :Dry Level (0 to 127)
Adjusts the level of the direct sound.
12: Drive Rotary
This is a rotary speaker simulator that makes overdrive possible.
Parameter Value Ranges:
1 :Overdrive Gain (0 to 127)
Adjusts overdrive gain.
2 :Overdrive Level (0 to 127)
Adjusts the overdrive output level.
3 :Speed (Slow, Fast)
Switches the speed mode between fast and slow.
4 :Brake (Rotate, Stop)
Stops speaker rotation.
5 :Fall Accel (0 to 127)
Adjusts acceleration when the speed mode is switched from fast
to slow.
6 :Rise Accel (0 to 127)
Adjusts acceleration when the speed mode is switched from slow
to fast.
7 :Slow Rate (0 to 127)
Adjusts the speaker rotation speed in the slow speed mode.
8 :Fast Rate (0 to 127)
Adjusts the speaker rotation speed in the fast speed mode.
9 :Vibrato/Chorus (Off, V1, C1, V2, C2, V3, C3)
Selects the vibrato (V) and chorus (C) type.
10 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
11 :Dry Level (0 to 127)
Adjusts the level of the direct sound.
Editing a Tone
EN-35