Casio Privia PX-560M User Manual page 28

Display Text
LFO Low Frequency Oscillator. This is a group of editable LFO parameters
applied to pitch, filter, and amp.
Pitch Wave Wave type. Specifies one of the following wave types to be used for LFO.
FilterAmpWave FilterAmpWave is shared by filter and amp.
Pitch Rate Rate. LFO speed (frequency). FilterAmpRate is shared by filter and amp.
FilterAmpRate
Pitch Depth Depth. Specifies how LFO is applied.
Filter Depth
Amp Depth
Pitch Delay Delay. Specifies the degree of delay in the timing for applying LFO.
Filter Delay
Amp Delay
Pitch Rise Rise. Specifies the time it takes from the start of application of the LFO
Filter Rise until the effect reaches the level specified by Depth, above.
Amp Rise
Pitch Mod.Depth Modulation depth. Specifies how modulation is applied to the LFO.
Filter Mod.Depth
Amp Mod.Depth
Portamento Portamento. This is a group of editable portamento parameters.
Portamento On/Off Portamento On/Off. Select "On" for a smooth glide from one tone to the
next, or "Off" when a smooth glide is not required.
Portamento Time Time. Specify the length of time for the tone change.
Pan Pan. This is a group of editable parameters associated with pan (sound
stereo position) operation.
Dynamic Panning Dynamic panning. To reflect changes in part panning in the sound being
produced, select "On" for this setting. Select "Off" if you do not want
changes reflected.
Pan Position Panning position. Select "PreDSP" to apply panning before the DSP, or
"PostDSP" to apply panning after the DSP.
Description
Sin
(sine wave)
Tri
(triangle wave)
Saw up
(sawtooth up
wave)
Saw down
(sawtooth down
wave)
Puls 1:3
(square wave 1:3)
Puls 2:2
(square wave 2:2)
Puls 3:1
(square wave 3:1)
Editing a Tone
Settings
Refer to the cell to the left.
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
Off, On
0 to 127
Off, On
PreDSP, PostDSP
EN-27