Navnet TZT9/14/BB TZ touch Settings Manual page 9

8. Verify the IP address was successfully updated.
9. Repeat this process with all of the other camera(s).
10. After the IP addresses have been changed, restart the cameras (power OFF/ON).
4-2. Configuring Axis IP Camera
Axis IP cameras must be configured using a Web browser.
1. Enter the IP address of the camera in the browser's navigation bar. In this example, "http://172.31.200.4" is entered.
2. The camera configuration page will open. Click on [Setup] to access the configuration page.
3. When prompted, enter the ID and Password noted below, and then click on [OK].
9