Showing Camera Images - Navnet TZT9/14/BB TZ touch Settings Manual

8. In [Basic Setup] – [4 Video

6. Showing Camera Images

This section describes how to show camera images on the TZT9/14/BB.
6-1. Checking Axis IP Camera(s) in Menu
1. After the interconnection and setup of the IP cameras is complete, confirm they are detected in the TZtouch network
by accessing [Menu] – [Camera] –
Detected
When a camera is detected, the "
2. Available IP camera sources are also displayed in the RotoKey™ menu.
Stream] – [Video 1] to [Video
[IP Camera 1] to [IP Camera
" symbol will appear.
4] and [Quad Stream] – [H.264] tab, set as follows.
4].
Disconnected or Not Detected
When a camera is disconnected or not detected, the " "
symbol will appear.
16