The Lay Shaft Assembly - Cectec KINGCOBRA Service Manual

ENGINE - Assembly

THE LAY SHAFT ASSEMBLY

N0. PART NAME
1. LAY SHFAT
2. CYLINDRICAL ROLLER BEARING
3. NEEDLE BEARING (HALF CAGE TYPE)
4. LOW SPEED DRIVEN GEAR (45T)
5. RETAIN C-RING
6. HIGH SPEED DRIVEN GEAR (36T)
7. WASHER
8. HNEEDLE BEARING (CAGE TYPE)
9. REVERSE DRIVEN GEAR (34T)
10. RETAIN C-RING
11. ADJUSTING WASHER
12. BEARING (DOUBLE ROW ANGULAR)
13. WASHER
14. WASHER
Before install gear and bearing , please lubricate with 10W/40
oil
1.Install bearing (2) into lay shaft (1) , be shall install bearing of
long side into bevel gear side
2.Install needle bearing (3) into lay shaft , then install low gear
(4) into lay shaft , be shall install low gear (4) of plane into
bevel gear side
3.Install retain C-ring (5) into lay shaft of groove
4.Install high gear (6) into lay shaft , be shall install high gear (6)
of fork groove side into another bevel gear side
PART NO.
46030002
CRBNU1007NR
46030031
46030007
RCS030
46030005
46030010
46030030
46030008
RCS025
46030016-26
46030029
46030012
SCF060200883
Ⅱ
- 30
Ⅱ