Engine Assembly Procedure; The Piston And Connection Rod Assembly - Cectec KINGCOBRA Service Manual

ENGINE - Assembly
Only trained and certificated technician can
disassembly the CECTEK 500 EFI ENGINE.
Improper disassembly may damage the engine.
CECTEK can not provide the warranty to the engine
which has not been properly disassembled and
assembled by trained and certificated technician.

THE PISTON AND CONNECTION ROD ASSEMBLY

NO. PART NAME
1. CONROD ASSY.
2. PISTON PIN
3. CLIP
4. PISTON-A
5. PISTON-B
6. PISTON RING TOP
7. PISTON RING SECOND
8. PISTON RING OIL CONTROL
CAUTION：
1.Before assembly , must
confirm if the piston (4,5) is
matching the category of liner
2.A category piston only can
be installed on A category liner
3.B category piston only can be
installed on B category liner
4.Make sure the liner size
mark on the cylinder
block
Ⅱ
- 25
PART NO.
40098013
40090024
40090027
40096011
40096012
40096013
40096014
40096015
Ⅱ