Table of Contents
Advertisement
IV. Installation and Operation
First use heavy cable to prevent voltage dropping while using main input cable. The resistance of main cable may
obstruct voltage dropping of input cable and affect arc striking and other systems.
4.1 Connection for input cable
1)
Each machine is equipped with a power cable. Please select appropriate voltage according to input voltage
otherwise it may damage internal elements inside.
2)
Ensure good connection between power switch or positive electrode and power cable to prevent oxidation
and measure power value for cutting by voltmeter.
IV. Installation and Operation
Connection diagram for cutter (Figure 1)
- 4 -
Hide quick links:
Advertisement
Table of Contents
