Package Contents - Bad Boy Xtreme N Installation And Operation Manual

Bitstorm Inc.
Copyright & Trademarks
Specifications are subject to change without notice. Other brands and product names are trade-
marks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivation such as translation, transformation or adaption without permission from Bitstorm Inc.
Copyright © 2014 Bitstorm Inc. All rights reserved.

Package Contents

Please check and ensure that you have all of the following items:
 1 BAD BOY Xtreme N or MJ Hi-Power Wi-Fi Device
 1 POE Injector with DC Power Cable, optional 100-250VAC Adapter
 1 Antenna with Mounting Nut (discard washed if indicated)
 1 Mount (Rail/Flat surface, 1-14 Adapter, Backstay or Pole)
 1 75' (23m) Outdoor Rated, PVC Jacket, UV Protected Black Cable
 1 10' (3m) Indoor Ethernet Gray Cable
 1 Grommet - for Xtreme N only (located under end cover)
 1 Packet of Connector Corrosion Inhibitor (located under end cover)
 1 Cable Splicing Junction Box with Punch Down Tool
 This Installation and Operation Guide
 Quick Start Guide
 Bitstorm Contact Info Cards
Note: If any items are damaged or missing, please contact your reseller.
Power Injector DUO
The Power Injector DUO (DUO) provides power to BAD BOY Wi-Fi devices via
Power-over-Ethernet (PoE). This is an Ethernet specification allowing powering
of remote devices without the need of a separate power cable. The DUO model
included is the M-POE-DUO-S15.5 which provides a regulated 15.5Vdc output.
It includes circuit protection for shorts and reversed polarity. There is also a
reset button slot to allow resetting of the system remotely. Refer to Appendix D.
Bad Boy Xtreme N & MJ
www.bitstorm.com 3