Thecus N8900 series User Manual page 164

NOTE
Restore NAS Configuration
This is a useful feature if the system configuration needs to be restored to a brand
new unit. Let's go thru the following example to see how it works.
The original source system has 3 RAID volume, "RAID", 'RAID10" and "RAID20",
and has backed up the system configurations to the target server.
The brand new source unit only has a 1 RAID volume 'RAID".
1. When adding a new backup task with "Full backup" or "Custom backup" and
enabling the option "Backup NAS Config" as shows below, the source unit
system configurations are then backed up to the designed path on the target
system every time the task is executed.
• To restore task with backup type set as "Real time", first you need to
stop the task then you can proceed with the restore operation.
164