Canon FS10 Instruction Manual page 61

4
Repeat steps 2-3 to protect
additional images or press
twice to close the menu.
IMPORTANT
Initializing the memory (
permanently erase all recordings,
including protected still images.
/
You can copy still images from the built-
in memory to the memory card and vice
versa.
POINTS TO CHECK
Select in advance the memory from which
you want to copy the still images (
Copying a Single Image
FUNC.
[ COPY]
FUNC.
Downloaded From VideoCamera-Manual.com Manuals
FUNC.
30) will
Copying Photos
(
[YES]
Copying Images from the Index Screen
Options
[ALL IMAGES]
Copies all the still images.
[ONE IMAGE]
Copies only the selected still image.
1
Move the zoom lever toward W.
The still image index screen appears.
2
Select the memory from which you
want to copy the still images.
Refer to To select which still images
24)
to play back (
3
If you want to copy only one
image, select (
image you want to copy.
57).
4
Copy the still image(s).
FUNC.
Desired option
FUNC.
* When copying all the still images, press
twice to interrupt the operation while it is in
progress.
** When copying a single still image, this step
is not necessary.
IMPORTANT
Observe the following precautions while
ACCESS
the
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the mode
dial.
57).
, ) the still
[ ]
COPY
[OK]**
[YES]*
indicator is on or flashing.
61