Canon FS10 Instruction Manual page 54

Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
Basic Recording
Taking Photos
1
Set the mode dial to
2
Turn on the camcorder.
/
memory to be used for recording still
images ( 30).
3 PHOTO
Press
• Once the focus is automatically
adjusted,
one or more AF frames will appear.
• When you press
wireless controller, the still image is
recorded after the autofocus is
activated and locked.
Downloaded From VideoCamera-Manual.com Manuals
54
(
.
You can select the
halfway.
will turn green and
PHOTO on the
4
PHOTO
Press
The ACCESS indicator will flash as
the still image is being recorded.
IMPORTANT
Observe the following precautions while
ACCESS
the
Failing to do so may result in permanent
data loss.
24)
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the mode
dial.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
( 46).
Selecting Photo Size and Quality
Still images are recorded as JPG files.
As a general rule, select a larger image
size for higher quality. Select the
[LW 1152x648] size for photos with an
aspect ratio of 16:9.
fully.
indicator is on or flashing.
( 24)