Canon FS10 Instruction Manual page 60

Photos
C S
ONTINUOUS HOOTING
H -S C
IGH PEED ONTINUOUS
PHOTO
1 Press
the autofocus.
PHOTO
2 Press
pressed down.
A series of still images will be
recorded as long as you hold the
button pressed.
A E
UTO XPOSURE
PHOTO
Press , first halfway to
activate the autofocus and then fully
to record the still images.
Three still images in different exposures
will be recorded.
Histogram Display
When viewing still images you can
display the histogram and the icons of
all the functions used at the time of
recording. Use the histogram as a
reference to verify the correct exposure
of the still image.
The area to the right of the histogram
represents highlights and the left side
represents shadows. A still image
whose histogram skews to the right is
relatively bright; while one whose
histogram peaks to the left, is relatively
dark.
Downloaded From VideoCamera-Manual.com Manuals
60
/
S
HOOTING
halfway to activate
fully and hold it
B
RACKETING
(
Shadows
NOTES
The histogram will appear also after
recording a still image, while reviewing it
within the time set for the [REVIEW] option
(or immediately after recording it, if
[REVIEW] is set to [
choose to turn off the histogram by
DISP.
pressing
Protecting Photos
You can protect still images from
accidental erasure.
1
Open the image selection screen.
FUNC.
[ PROTECT] appears on the
24)
screen.
2
Select (
want to protect.
3
Press
image.
appears on the bottom bar and
the image cannot be erased. Press
again to cancel the image
protection.
Highlights
OFF]). You can
( 49)
.
[ PROTECT]
) the still image you
to protect the still
( 24)