Screw-On Type (Da 40Mm F/2.8 Limited Dedicated Lens Hood); Bayonet Type - Pentax DA FISH-EYE 10-17mm f/3.5-4.5ED [IF] Operating Manual

e_kl567_16.fm Page 26 Wednesday, April 23, 2008 11:42 AM
26
26
b
b.

Screw-on Type (DA 40mm f/2.8 Limited dedicated lens hood)

Screw the hood on to the front of the lens to attach it.
c.

Bayonet Type

When attaching the lens hood, align the index on the lens hood with the attaching index
on the lens, and push both parts straight toward each other. Attach the lens hood on the
lens by turning the hood in the clockwise direction to lock it as viewed from the front of
the lens until it clicks into position.
Memo:
• When attaching the lens hood, hold the focusing ring and zoom ring securely to
prevent them from turning.
• When the lens hood is not in use, it can also be turned around and attached in the
reversed position.
c
Lens hood
attaching
index