Screw-On Type (Da 40Mm F/2.8 Limited Dedicated Lens Hood); Bayonet Type - Pentax DA 14mm f/2.8ED [IF] Operating Manual

e_kl577_17.fm Page 27 Friday, June 27, 2008 3:37 PM
b
b.

Screw-on Type (DA 40mm f/2.8 Limited dedicated lens hood)

Screw the hood on to the front of the lens to attach it.
c.

Bayonet Type

When attaching the lens hood, align the index on the lens hood with the attaching index on the lens,
and push both parts straight toward each other. Attach the lens hood on the lens by turning the hood
in the clockwise direction to lock it as viewed from the front of the lens until it clicks into position.
Memo:
• When attaching the lens hood, hold the focusing ring and zoom ring securely to prevent them from
turning.
• When the lens hood is not in use, it can also be turned around and attached in the reversed
position.
27 27
c
Lens hood
attaching index