Installation; Audio Connections; Video Connections - SONIQ B500-AU Instruction Manual

Installation

Audio connections

NOTE: before you make any connections, ensure the Blu-ray player, Sub woofer and any TV /
Monitor you wish to connect to is switched OFF.
● Connecting the Blu-ray player to an external amplifier
There are two digital audio output options,COAXIAL or OPTICAL. See the diagram across.
(optional) Digital Inputs

Video connections

There are a number of ways to connect the Blu ray player to your TV or monitor. See the
diagram across for examples.
1. HDMI: This is the standard connection for High Definition TV and can carry video and audio
signals.
Will this machine and compatible with 3 D TV connection, can be 3 D Play video.
2. COMPONENT: This connection only carries video. Connect one end to the Blu-ray player the
other end to your TV/Monitor.
3. COMPOSITE: This connection only carries video and the cable is usually yellow. Connect
one end to the Blu-ray player the other end to your TV/Monitor.
NOTE: YUV and VIDEO will have no signal output under the below two conditions.
1.There is only HDMI output when playing 3D blu-ray video.
2.There is only HDMI output when the resolution from the SETUP menu is set to 1080P
24Hz.
COMPONENT CABLE
COMPOSITE CABLE
HDMI CABLE
B500说明书.indd 10-11
Amplifier with decoder
TELEVISION
-10-
Installation
Other connections
Connecting to an external amplifier and TV using HDMI cables.
If you have an external Amplifier that supports HDMI audio, then you can connect the Blu-ray
player to the Amplifier HDMI input and then the HDMI output to your TV or monitor.
Many track speakers
-11-
HDMI IN
HDMI line HDMI line HDMI line
Amplifier
HDMI IN
HDMI line
Blu-ray player
2011-10-15 9:54:31