Erasing Data From A Usb Device Or Sd Card; Advanced Operation; Setup Menu; General Menu - SONIQ B500-AU Instruction Manual

User Instructions
Press the POPUP MENU button to view the available options.
1. CONTENTS INFORMATION
Select the Contents information option to view details about the highlighted file. Such as image
resolution, filename, and any other detail stored within the file.
2. SLIDESHOW SETUP
This option allows you to set the viewing duration of each image, and whether they repeat or
not.
3. SLIDESHOW START/CONTINUE
Use these options when choosing to start a slide show or to resume a slide show.
SKIP: FAST/FWD ► ► or FAST/REV ◄◄ buttons will advance to the next or previous image.
ROTATE: During playback of a slide show press the POPUP MENU button to access the rotate
options.

Erasing Data from a USB device or SD Card

Should you wish to remove BD-Live data you have stored on a USB device or SD Card . Follow
this procedure.
1. With the USB drive or SD Card inserted in the slot, press the SETUP button.
2. Select BD-VIDEO DATA ERASE using the
navigation buttons, and press ENTER to activate.
3. Select START using the navigation buttons, then press the ENTER button to erase all the
data from the device. Select CANCEL to cancel the procedure.
B500说明书.indd 20-21
-20-

Advanced Operation

Setup Menu

When the SETUP button is pressed you will
be faced with a menu, select the SETTING
option to enter the main settings menu.
The options here are split into categories
for easier navigation : GENERAL, VIDEO,
A U D I O , L A N G U A G E , PA R E N TA L &
NETWORK.
Use the navigation buttons to navigate the
menu and the ENTER button to select an
option.

General Menu

Below is a list of available options and a
description of each setting.
RESTORE SETTINGS
Select this option of you want to reset all the
settings to the factory defaults. (On-Screen
Language, Parental, Network settings remain
unchanged).
Gen er al Restore Settings
Yes
Vi d eo
Screen Saveru
A u d i o
L an g u ag e
Par en t al
Net w o r k
-21-
Screen Saver
Choose this option you want to set Screen
saver ON or OFF
Gen er al Restore Settings
On
Vi d eo Screen Saveru
Off
A u d i o
L an g u ag e
Par en t al
Net w o r k

Video Menu

TV ASPECT
Use this option to set the required TV Aspect
ratio. The options are as follows:
4:3 PAN-SCAN: This is for 4:3 TV's and will
stretch the wide image top to bottom and cut
off the sides.
4:3 LETTERBOX: Again this is for 4:3 TV's
but this will add black bars top & bottom for
widescreen material.
16:9: This is the standard widescreen format,
4:3 material will be displayed with black bars
on either side.
16:9 FULL: This setting will stretch all
material to fill the screen on a widescreen
TV.
Gen er al TV Aspect
4:3Pan&Scan
Vi d eo
HDMI 4:3 Letter box
A u d i o
16:9
L an g u ag e
16:9Full
Par en t al
Net w o r k
2011-10-15 9:54:33