Connecting Usb Sd/Device; Playing A Cd Disc; Data Playback - SONIQ B500-AU Instruction Manual

User Instructions
TOP MENU: Select this option to return to the discs main title screen.
POPUP MENU: Select this option and depending on how the disc is authored a pop up menu
will appear adding extra functionality.
For example, a chapter selection menu may appear on screen.
Connecting USB/SD Device
Connecting USB /SD Device Supported Audio, Video, Picture files types
Video: MPEG-4 files. Music: mp3 files .wma files. Picture: jpeg files.
USB storage devices with supported files stored on a FAT32partition will be recognized.
SD storage devices with supported SD MAX2GB (FAT16) and 4 GB SDHC ~ 32 GB FAT32
NOTE:
The USB device must be formatted as a FAT32 drive, NTFS and other filesystem types
are not supported.
USB interface output voltage of DC5V (± 0.1V) Maximum output current 0.5 A
If USB drives the work more than 0.5 please increase A current USB driver external power
supply, to see the appended drawings:
Native USB
Interface
NOTE: USB/SD Device do not support 3D video files.

Playing a CD Disc

1. Press the STANDBY button to power on the unit. When powered on the STANDBY/POWER
light will be blue.
2. Press the OPEN/CLOSE button to open the disc tray, "OPEN" will appear on-screen. Insert a
disc with the label facing upwards into the tray.
3. Press the OPEN/CLOSE button to close the tray "CLOSE" will appear on-screen, then
"READING" will briefly display. After loading, the menu screen of the disc should appear. Use
the navigation buttons to select your required option and press the ENTER button to select.
4. To stop playback, press the STOP button. Press the PLAY button again to resume playback
from where you left off. If the STOP button is pressed a second time the resume option is
cancelled.
B500说明书.indd 18-19
External USB
Interface
USB Drive
-18-
User Instructions
5. Press the PAUSE ll button to pause playback. To resume playback press either the PAUSE ll
or PLAY ► button.
SELECTING TRACKS USING THE NUMBER BUTTONS
Press the number button(s) corresponding to the track number you would like to play, then press
the ENTER button and the player will start to play your specified track.
SELECTING TRACKS USING THE NUMBER BUTTONS
During playback, pressing the SKIP ►►l buttons will select the playing tracks and begin
playback.
Again Press the SKIP l ◄ ◄ buttons will select the previous tracks and begin playback, one more
press makes it move to the beginning of the previous tracks.
FORWARD >> / REVERSE << SEARCH
During playback, press either the FAST/FWD ►► or FAST/REV ◄◄ buttons to advance the
disc forward or backwards at double speed X2. To increase the advance rate, press the button
again repeatedly to cycle between: X2, X4, X8, X16 and X32.
To resume normal playback press the PLAY button.
When the SUB MENU button is pressed, a sub menu will appear on-screen.
The content of this menu depends on the disc being played at the time.
Select a category using the navigation buttons, press the ENTER button to select the option.
Most options have sub menus attached to expand further options.
Some categories are disc dependant, but a description of most can be found below.
PLAYBACK
Repeat: Select to repeat ALL, TRACK, RANDOM ( like shuffle ) or OFF.

Data Playback

PLAYBACK OF DATA (PICTURE AUDIO) DISC/ SD/USB
Press the BD/SD/USB button to select the input you wish to view files from.
After a short period a list of available folders and files will appear on-screen.Use the navigation
buttons to select an image or a folder and press the ENTER button to start playback or to open
the folder. To return to the previous folder navigate up to the ".." icon at the top of the list and
press ENTER.
To return to the selection menu during playback press the RETURN button.
NOTE: These below options are limited to the folder list screen and won't be available
during a slide show.
-19-
2011-10-15 9:54:32