Blades
Place each blade between a blade iron
and medallion. Install the blade screws,
found in the
hardware bag, to attach
the medallion to the blade iron. Repeat
for all blades.
Remember the screws that
you kept after removing the
shipping blocks (page 7)? You
need them plus five more from
the hardware bag for this step.
Lightly attach the blade irons to the
motor with screws found in
the
hardware bag, then securely
tighten after both screws are attached.
13
13
M8508-01 • 06/05/13 • © Casablanca Fan Company
www.CasablancaFanCo.com
Suitable for use in wet locatons when
installed in a GFCI portected branch
circuit. If unsure, contact an electrician.
1.888.227.2178