troubleshooting
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Low or decreasing
suction.
Cord does not rewind
fully.
Vacuum cleaner dows not
pick up dirt.
Body overheating.
Static electicity
discharge.
This Vacuum cleaner is approved the following.
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
SOLUTION
• Check cable, plug and socket.
• Leave to cool.
• Check for blockage and remove.
• Please check filter and, if required, clean as illustrated in the
instructions. if filters are out of condition change them to new ones.
• Pull the cord out 2-3 m and push down the cord rewind button.
• Check hose and replace if required.
• Please check filters, if required clean as illustrated in the instruction.
• Please decrease power suction.
• This can also occur when air in the room is very dry.
Please ventilate the room to air humidity become a normal.
troubleshooting _23