Table of Contents
Advertisement
2.
According to the Temperature Control Settings and Garment Care Instructions, turn the
temperature Control dial to the correct temperature. When the pilot light turns off, the
required temperature is reached. The iron is ready for use.
3.
After ironing, please turn the Temperature Control Dial to the MIN position. Pull out the
plug, stand the iron upright, and wait until the soleplate has cooled down completely
before packing away for storage.
10. SPRAY FUNCTION
This function can be used any time and it does not affect the ironing temperature.
1.
Fill water into the iron up to the Max level of water tank.
2.
Aim the spray nozzle at the garment.
3.
Press the Spray Button.
11. SELF-CLEANING
If you push the button of self-cleaning, a strong steam will be injected from the soleplate,
thus the iron can be cleaned from the inside to avoid the vents of the soleplate becoming
blocked.
12. CLEANING & MAINTENANCE
1.
After using, first unplug the unit and allow it to cool down before cleaning.
2.
Empty out the remaining water. Hold the soleplate away from you while doing this
incase it is still hot.
WARNING:
The contents of the water tank may also still be hot.
3.
Wipe the soleplate with a soft wet cloth and keep it level and smooth avoiding
mental-friction.
4.
Scrub incrustation off the spraying nozzle with a toothpick.
5.
Wash the inside of the water tank frequently. First fill with water, then sway it from side
to side finally pouring out the water through the water opening.
6.
Don't use strong acid or alkali products on the iron as this may damage the frame and
produce a colour change to the body of the unit.
7.
Do not use harsh abrasive cleaners or solvents when cleaning the iron.
8.
Pour out water in the water tank completely after using every time, and store it upright.
12. IF THE PLUG NEEDS CHANGING
1.
Connect the Green/Yellow wire (Earth) to the terminal marked E
2.
Connect the Blue wire (Neutral) to the terminal marked N.
3.
Connect the Brown wire (Live) to the terminal marked L.
4.
Fasten the grip cord securely.
5.
If in doubt, please consult a qualified electrician.
7
Advertisement
Table of Contents
