Salton elite SEI001 Warranty And Instructions page 9

Steam control is not set to the
No steam steam position.
No water in the water tank.
The temperature control is not
set in the steam area.
Dripping
Soleplate doesn't reach the
temperature required.
Power cut or fuse-wire cut off
No heat
The steam opening is blocked
by dirt.
Little steam
Temperature control is not set in
the steam area.
Inadequate The position of temperature
heat or too control is not correct
hot
14. AUTO-INTERRUPTION SAFETY PROTECTION FUNCTION
When the auto-temperature modulator ceases to be effective, the super-temperature fuse
installed in the product will automatically come into effect to prevent overheating. Should
this happen, please take your appliance in to be examined and serviced.
Turn the temperature control to
the correct position.
Fill water in the water tank.
Set the temperature control to
the steam area.
Turn up temperature properly
Change fuse wire or stop using
the appliance. Have it examined
and/or repaired.
Remove dirt
water.
Adjust the temperature control
to the steam area.
Turn the steam control to the 0
or little steam position.
9
with distilled