Advertisement
Quick Links
Thank you for purchasing a WIKE BOX BIKE!
Contents
Safety..............................................................3
Front wheel....................................................4
Kickstand........................................................5
Handle Bar & Box..........................................6
Seat post and Saddle....................................7
Final pre-ride check.......................................8
Tools needed to assemble Bike:
-High table or Stand
-Set of Allen/Hex wrenches
-Cable cutters
-12mm & 15mm wrenches
-Grease
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WIKE BOX BIKE
Summary of Contents for WIKE BOX BIKE
- Page 1 Thank you for purchasing a WIKE BOX BIKE! Contents Safety……………………..…………………………..….3 Front wheel…………………………………………….4 Kickstand………………………………………………..5 Handle Bar & Box……………………………………6 Seat post and Saddle………………………………7 Final pre-ride check…………………………………8 Tools needed to assemble Bike: -High table or Stand -Set of Allen/Hex wrenches -Cable cutters -12mm & 15mm wrenches...
- Page 2 1. Handle bar & brake 12. Frame lever 13. Chain cover and chain 2. Gear shift 14. Chain wheel and crank 3. Brake lever 15. Pedal 4. Box 16. Rear wheel 5. Corner iron 17. Rear fender 6. Front light 18.
- Page 3 Remember to comply with all bicycle safety laws and use common sense especially in adverse weather condition Wike takes no responsibility for accidents resulting from failure to comply with all bicycle safety laws, careless driving or improper maintenance of your box bicycle...
- Page 4 Front Wheel Assembly (Figure 3.) 1. Assemble the fender onto the fork as shown in figure below using the long bolt provided 2. Assemble the front wheel and drum brake simultaneously 3. As you put the wheel set between fork legs and lock bolts line up and slide drum brake leg into fork slot -Screw cable stopper into cable stopper adapter...
- Page 5 Kickstand Assembly (Figure 4.) 1. Elevate the entire bike securely (hook seat on edge of table) 2. Slide hole in “L Bracket” for spring over “Cross tube” of the frame and bolt using large bolt to top of bicycle frame. 3.
- Page 6 Handle Bar Assembly (Figure 5.) 1. Slide handlebar stem into head tube of bicycle at least 2 inches. 2. Adjust the height you wish (you must maintain 2 inches inside). 3. Align handlebars with front wheel 4. Tighten the head set bolt. 5.
- Page 7 Saddle and Pedal Assembly (Figure 8.) 1. Insert seat post into the seat and lock it with nut as shown in figure 8. 2. Put other end of post into the frame seat tube with seat post clamp and tighten to desired height 3.
- Page 8 11. Lights and bell function properly Contact Us US and Canada Toll Free: 866- FACTORY SHOWROOM 584-9452 79 Regal Road, Unit 14 Worldwide: 1-519-824-3869 Guelph, Ontario Fax: 519-822-6152 N1K 1B6 8.00am to 3.00pm M-F 7 days a week 8.00am to 8.00pm EST wike.ca...
Need help?
Do you have a question about the BOX BIKE and is the answer not in the manual?
Questions and answers