Advertisement
How to Connect and Detach Earphone from Cable
Eartip Fitting and Selection
To find a fit for everyone, PSB Speakers supplies an accessory package filled with various shapes and sizes of earphone tips for finding the perfect fit. From
smallest to largest, test out each earphone tip to find the best seal and most comfortable fit for the size and shape of your ear canal. Also make sure the
headphones will stay in the ear and not fall out while being active, like running or cycling.
Fitting Tips
NOTE: DO NOT insert the earphone tip deep enough to plug the ear as this could result in permanent damage to the ear canal.
Comply™ Foam Eartips
Delivering maximum isolation for a superior audio excellence, the supplied Isolation Plus Tx-Series tips have an integrated Wax-Guard, preventing wax
from entering the sound port, which will diminish sound quality. They also provide amazing comfort and a stay-in-ear fit.
Inserting the Comply Premium Earphone Tip
You may need to detach the cable from the earphones if you wish to use a different
cable or replace the cable if it becomes damaged. To avoid the cable accidently
separating from the earphone, the connector has a snug fit. Make sure the cable is
firmly attached to the earphone before use.
I.
Grasp the cable near the connector and the earphone as close as possible to the
connection point.
II.
Push/pull the cable and earphone straight together/apart—do not twist. Cable is a
snap fit, not threaded.
III. Listen for an audible click when connecting/disconnecting.
IV. When reattaching the cable, match the colour.
Selecting the correct earphone tip will have a major impact on sound quality. With a proper fit and seal,
the listener will be isolated from unwanted surrounding noise and have increased bass response and better
tonal balance, and a more comfortable secure fit.
To know whether the earphone tip is properly sealed within your ear, insert the earphone tip into the
ear canal and try listening to ambient noises with no music playing. If there is a proper seal, the sound
will be dull and distant. If the sound is clear, the earphone tip is not properly sealed inside the ear. If the
sound can faintly be heard in the distance but pressure is felt inside the ear, the earphone tip has been
over-inserted and must be readjusted.
Silicon Eartip Insertion and Removal
I.
Holding the right earphone in your right hand, pull up and back on the outer part of the ear to
open the ear canal.
II.
Carefully insert the earphone (eartip first) to create a complete and comfortable seal inside the ear.
III.
When done listening, slowly twist the eartip from the ear canal to break the seal and remove the
earphones.
Repeat these steps with the left earphone.
3
I.
First roll the tip into a thin, round cylinder.
II.
Pull back and up on the ear to open the canal.
III.
Gently insert the entire tip into the ear. Hold the tip in place
until it expands.
Advertisement
