Lenovo Flex 3-1470 Hardware Maintenance Manual page 73

Flex 3-1470/Flex 3-1470 (HSW)/Flex 3-1435/Flex 3-1475/
Flex 3-1570/Flex 3-1570 (HSW)/Flex 3-1535
Figure 13. Removal steps of sensor board and antenna assembly (continued)
Flex 3-1570/Flex 3-1570 (HSW)/Flex 3-1535
Detach the sensor board connector in the direction shown by arrow 1, then
remove the sensor board in the direction shown by arrow 2.
When installing: Make sure that the connector is attached firmly.
Peel off the adhesive tape securing the cables 3.
69