1050 Dimm - Lenovo Flex 3-1470 Hardware Maintenance Manual

Flex 3-1470/Flex 3-1470 (HSW)/Flex 3-1435/Flex 3-1475/Flex 3-1570/
Flex 3-1570 (HSW)/Flex 3-1535 Hardware Maintenance Manual

1050 DIMM

42
For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 35
Figure 5. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
directions shown by arrows 1, and then unplug the DIMM in the direction
shown by arrow 2.
When installing: Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed
in the slot and is difficult to move.
2
1 1