Advertisement
Adjust the brake cable by loosening nut on the banjo bolt slightly so you can pull the cable through more and
retighten the nut.
Adjusting the Foot Pegs
The foot pegs can be rotated either perpendicular to the bike so that the rider can use them to rest their feet or
rotated in to keep them completely out of the way. To adjust the pegs, simply depress silver button on spring pin
and turn until tab falls into the appropriate hole.
Installing the Kickstand
To install the kickstand, first, turn bike onto seat and handlebars, and then remove the axle nut and flat washer
from the rear tire on the side of the bike with the brake assembly, then remove the hook washer (you can save
this, it isn't needed). Once you have removed the axle nut, loosen the axle nut on the other side (you don't have to
remove it). Taking the kickstand, align the dimple onto the hole from where the hook washer was removed.
Replace flat washer and axle nut and realign tire with frame and retighten the axle nuts.
Advertisement
