Track Play Mode; Overview; Selecting Tracks; Normal Mode - Abstrakt Instruments Avalon Reference Manual

8 TRACK PLAY MODE

TRACK PLAY MODE is used to play back programmed tracks without
the ability to destructively edit them.

8.1 OVERVIEW

TRACK PLAY MODE does not allow editing of pattern or track step
parameters. Below is a simple graphical representation of the basic
workflow of TRACK PLAY MODE:

8.2 SELECTING TRACKS

Select one of the (7) TRACKS to write to using the TRACK / PATT.
BANK selector.

8.3 NORMAL MODE

NORMAL MODE is the only (sub) mode with TRACK PLAY MODE.
Simply press RUN to play a track.

8.3.1 TRACK STEP INDICATORS

The current track step can be viewed on the STEP BUTTON &
BUTTON 1-4 LED's as described in section 7.3.1.
30

8.4 REALTIME MODE

In REALTIME MODE track steps can be manipulated realtime by
overriding transpose, accent, slide, and mod env. settings.
8.4.1 REALTIME ACCENT & SLIDE
Accent and Slide can be played to trigger accents and slides.
To override pattern step data with accents and/or slides, press
[PITCH] + [ACCENT] / [SLIDE]. For example, to force a pattern to
accent steps press and hold [PITCH] + [ACCENT].
Accent and Slide can also be played realtime to mute accents and
slides.
To override pattern step data and mute accents and/or slides, press
[FUNCTION] + [PITCH] + [ACCENT] / [SLIDE] . For example, to force a
pattern to mute accents press and hold
[ACCENT].

8.4.2 REALTIME MOD ENV

The modulation envelope can be triggered in realtime by pressing
[PITCH] + [ENV]. Each time the button combination is pressed the
modulation envelope will be triggered.
To mute modulation envelope triggers to prevent it from being
triggered press [FUNCTION] + [PITCH] + [ENV].

8.4.3 REALTIME MUTE

Rests can be played realtime to override the pattern time data. This
selectively mutes the pattern. This is done by pressing REST .
[FUNCTION] + [PITCH] +
AVALON - Reference Manual