Record Transpose; Record Accent & Slide; Record Mod Env; Record Slide Time - Abstrakt Instruments Avalon Reference Manual

5.4.2.2 RECORD TRANSPOSE

To record realtime TRANPOSE press [PITCH] + [UP]/[DOWN]. For
example to transpose a step, series of steps, or an entire pattern down
one octave press and hold [PITCH] + [DOWN] in realtime.
5.4.2.3 RECORD ACCENT & SLIDE
To record realtime ACCENT & SLIDE press [PITCH] +
[ACCENT]/[SLIDE]. For example, to record accents to a step or series
of steps press and hold [PITCH] + [ACCENT] in realtime.
If recording from an external MIDI device ACCENTS will be
programmed for notes with a NOTE ON velocity higher than MIDI
value 63. SLIDES are programmed when notes are played legato
(overlapping).

5.4.2.4 RECORD MOD ENV

To record realtime MOD ENV triggers press [PITCH] + [ENV]
whenever you would like to add a trigger to a step or series of steps.
If recording realtime from am external MIDI device MOD ENV triggers
can be recorded by sending MIDI CC#80 with a value higher than 63.

5.4.2.5 RECORD SLIDE TIME

You can also record realtime SLIDE TIME by pressing [PITCH] +
SECTION + BUTTON 1-4.
BUTTONS 1-4 select the four available slide times.

TIME 1 = 30mS

TIME 2 = 100mS (default 303)

TIME 3 = 250mS

TIME 4 = 1s

5.4.2.6 RECORD FILTER CV OFFSET

FILT CV offsets can be recorded from an external MIDI device by
pressing and holding [FUNCTION]
Avalon MIDI CC#74 messages from an external device. The incoming
MIDI data will be sampled and the value set for each step.
Filter cutoff data (MIDI CC#74) is also received by the Avalon
outside of RECORD MODE for traditional cutoff control (not a per-step
parameter lock).
22
+ [FILT CV] while sending the
5.5 REALTIME MODE
Realtime Mode is used for adding or muting accent, slide and/or
modulation envelope triggers in realtime without overwriting the
pattern data. If you want to edit the data permanently use Record
Mode as described in section 5.4.
5.5.1 REALTIME ACCENT & SLIDE
Accent and Slide can be played to trigger accents and slides.
To override pattern step data with accents and/or slides, press
[PITCH] + [ACCENT] / [SLIDE]. For example, to force a pattern to
accent steps press and hold [PITCH] + [ACCENT].
Accent and Slide can also be played to mute accents and slides.
To override pattern step data and mute accents and/or slides, press
[FUNCTION] + [PITCH] + [ACCENT] / [SLIDE] . For example, to force a
pattern to mute accents press and hold
[ACCENT].

5.5.2 REALTIME MOD ENV

The modulation envelope can be triggered in realtime by pressing
[PITCH] + [ENV]. Each time the button combination is pressed the
modulation envelope will be triggered.
The modulation envelope can also be triggered with the sequencer
stopped. This can be useful for drones with long evolving filter and/or
VCA modulation.
To mute modulation envelope triggers to prevent it from being
triggered press and hold [FUNCTION]
[FUNCTION] + [PITCH] +
+ [PITCH] + [ENV].
AVALON - Reference Manual