Installing And Connecting; Mains Power Connection; Audio Signal Connections - NAIM UnitiQute 2 Reference Manual

Your Uniti Series product should be installed on an equipment stand intended for the purpose. Do not stand it directly on
top of another item of equipment and ensure it is well ventilated. Care should be taken to ensure that it is level. It should be
installed in its final location before connecting cables or switching on. Uniti Series products have no standby mode and are
intended to be left switched on.
Note: A transit screw on the underside of the NaimUniti 2 case should be removed before use and replaced if the unit is
to be moved. This transit screw must not be used in any other Naim product. Handle NaimUniti 2 with extra care once the
transit screw is removed.
Connecting your Uniti Series product mains power and to a variety of audio peripherals and sources is described in the
following paragraphs. Diagram 2.11 illustrates the rear panel connection sockets.

2.1 Mains Power Connection

Connect your Uniti Series product to a mains power socket
using either the mains cable supplied or a Naim Power-Line.

2.2 Audio Signal Connections

Table 2.2.1 lists the audio inputs and outputs provided
on each Uniti Series product. Always use high quality
interconnect cables to connect inputs and outputs.
Note: Post volume control output signals are affected by
volume adjustments. Pre volume control output signals
are unaffected by volume adjustments and must be routed
via a volume control before reaching a power amplifier.
2.2.1 Audio Signal Inputs and Outputs
UnitiQute 2
Type Name
Input Analogue
Input Front
Input dig. 1
Input dig. 2
Input dig. 3
Input dig. 4
Output Preamp
Output Digital
UnitiLite
Type Name
Input an. 1
Input an.2
Input Front
Input dig. 1
Input dig. 2
Input dig. 3
Input dig. 4
Output Preamp

2. Installing and Connecting

Format
Analogue RCA phonos
Analogue 3.5mm jack
Digital 3.5mm mini-TosLink
Digital coaxial (RCA phono)
Digital optical (TosLink)
Digital coaxial (RCA phono)
Digital optical (TosLink)
Analogue RCA phonos
Digital BNC
Format
Analogue RCA phonos
Analogue RCA phonos
Analogue 3.5mm jack
Digital 3.5mm mini-TosLink
Digital coaxial (RCA phono)
Digital optical (TosLink)
Digital coaxial (RCA phono)
Digital optical (TosLink)
4-pin DIN
Notes
Fixed volume capable
Combined auto-switching analogue/digital socket
Post volume control
Pre volume control
Notes
Fixed volume capable
Fixed volume capable
Combined auto-switching analogue/digital socket
Post volume control
3