Figure 8-Wiring For Audio Sources And Ir Emitters - M&S Systems XDM4600 Xtreme Digital Music system Owner's Manual

Figure 8—Wiring for Audio Sources and IR Emitters
Locate the source inputs on the back of the Central Controller and connect the appropriate audio source
cables. Connect each source output, left and right, using quality audio source cables.
•
Line-level audio cables carrying audio to the Central Controller are shown connecting the audio
sources to the Central Controller.
•
Line-level audio cables carrying audio out from the Central Controller are shown connecting the
Central Controller to the tuner audio component.
The Emitters are plugged into the IR Emitter ports on the back of the Central Controller as shown in
Figure 8.
• Connect each IR Emitter cable to the corresponding IR output on the back of the Central Controller.
•
Remove the adhesive back and position each IR repeater on the product you wish to control. Stick
the repeater directly over the audio equipment IR window. Extra adhesive backs are provided.
M&S Systems | 800.421-1587 | www.mssystems.com
XDM
4600
15