Installing The Central Controller; Figure 7-Xdm4600Kit Wiring Scheme - M&S Systems XDM4600 Xtreme Digital Music system Owner's Manual

Figure 7—XDM4600KIT Wiring Scheme. NOTE for detailed Keypad wiring refer to figure
10 under installing zone keypad section of the manual.
Figure 7 shows the system wiring schematic for the Central Controller (XDM46CC), four Zone Keypads
(XDM46K) and their speaker pairs.
How to read the schematic:
•
CAT-5 cables are shown connecting the Central Controller to the Zone Keypads and the Door
Station.
•
16-gauge, 2-conductor power wire is shown connecting the Central Controller to the Zone Keypads
and 18-guage, 2-conductor speaker wire connecting the Zone Keypads to their speakers.
•
At the top of the Central Controller, the line going from the Central Controller in the direction of
the Expansion Hub represents the connection cable.

Installing the Central Controller

The Central Controller has six analog audio inputs for sourcing music to the system. Communication
between the Controller and the zones is digital.
M&S Systems | 800.421-1587 | www.mssystems.com
XDM
4600
13