Download Print this page

Steinberg CC121 Firmware Upgrade Document

Advanced intergration controller
Hide thumbs Also See for CC121:

Advertisement

Quick Links

V1.5 New Functions

Advertisement

loading
Need help?

Need help?

Do you have a question about the CC121 and is the answer not in the manual?

Questions and answers

Summary of Contents for Steinberg CC121

  • Page 1 V1.5 New Functions...
  • Page 2: Front Panel

    CC121 and the computer is enabled or not. This lamp flashes to indicate that the CC121 is bus-powered from the connected computer. When the lamp is lit continuously, communication with the computer is enabled and Link functions are avail- able.
  • Page 3: Channel Select

    · The motorizing function of the fader is available only channel. when the AC power adaptor is connected to the ] (Edit Instrument) button CC121. Opens/closes the VST instrument settings window 2 PAN knob for selected track. Controls the PAN parameter.
  • Page 4: Normal Mode

    ■ EQ sections The functions of the EQ section differ according to the mode: Normal, Selecting EQ TYPE, and Operat- ing Quick Control. Refer to the following table for explanations of the function in each mode. Normal mode This mode lets you adjust the parameters of the 4- band EQ built into the Audio track or Instrument track.
  • Page 5 Selecting EQ TYPE mode Operating Quick Control mode This mode lets you select the shape type for the cor- This mode lets you operate the Quick Control func- responding band. In the Normal mode, press the tions built into the Audio track or Instrument track. [EQ TYPE] button to enter the Selecting EQ TYPE Press the [EQ TYPE] button and the [ALL BYPASS] mode.