Set Up Voltage - 3Com 3644A User Manual

2.3.1 Set up voltage

keypad and by the rotary knob. Please see the following operation procedure.
Procedure
Step 2
Step 3
Step 4
For example, how to set up the output voltage at 24.3V
1. To set up by using number keyboard
Step1. Press "V-set" button,
Step2. Enter the password by using the number keypad (if the keypad is unlocked,
Step3. Press Enter button (if the password is wrong, please do step2 for reentering),
Step4. Press "2", "4", "." and "3" button to enter the voltage value,
Step5. Press "V/A" button to confirm the voltage value.
2. To set up by using Rotary knob
will be continually changed from the previews value according the rotation. At the beginning,
the cursor will be shown on the last number of the value which is indicated on the LCD, you can
move the cursor to the first number, second number etc by using "
buttons, and then rotate to change each number, and let it stay at 24.3 V, then confirm the value
by pressing "V/A" button.
(2) If the keypad is locked by password
Step1. Press "V-set" button,
Step2. Enter the password by using the number keypad,
Step3. Press Enter button (if the password is wrong, please do step2 for reentering),
Step4. Rotate the Rotary knob button to change the value, the operation is as same as item(1)
Step5. Press "V/A" button to confirm the voltage value.
3600 Series Programmable Power Supply
VERSION 2.0 2004.6
3600 series power supply provides two methods to set up the output voltage: by the number
Operation details
Step 1 Press "V-set"
Enter the password ( Or jump to step 4 if the keypad
is unlocked)
Press "Enter" button ( it will return to step 2 if your
password is wrong for reentering)
Press "V-set" .Set the voltage voltage to 24.00V by using
the number key or the rotary knob.
Step 5 Press "V/A" or "mV/mA" to confirm the set,
it will return to step 4 for reentering if this voltage value
exceed the maximum output voltage.
It will exit the setting up voltage operation at any procedure by press ESC button
please do step 4),
(1) If the keypad is unlocked by password, directly rotate the "Rotary knob", and the voltage
3600 SERIES USER MANUAL
LCD display
ENTER PASSWORD
ENTER PASSWORD
ENTER PASSWORD
****
SET VOLT= 0.000V
NEW=
SET VOLT= 24.00V
NEW= 18
"and " "
9