Maintenance - OTS MK-7 BUDDY-LINE User Manual

The MK-7 Buddy-Line is virtually maintenance free and should give you great
service during the life of the unit. The following are recommended service tasks:
1. Try to keep the headset with boom microphone as dry as possible.
2. Do not store the ComRope in a sealed container without drying it first. It will
grow mold if not dry.
3. If the ComRope was used in salt water, soak it in freshwater for about five
minutes before drying.
4. If salt water gets onto the headset and/or MK-7, wipe it with a clean cloth and
freshwater. Warm water and a mild soap solution can be used. Wipe it off with
freshwater before drying.
5. Disconnect all connectors when storing.
6. Lightly lubricate the Hi-USE
7. If the MK-7 is not going to be used for a long period of time, the batteries
should be removed.
Although the MK-7 Buddy-Line is a ruggedly constructed piece of your diving
gear, it should be treated like an electronic piece of equipment!
Use any standard safe entry into the water, but be aware of the additional
equipment you are wearing. Because the ComRope can snag on things, be aware
of obstacles in the area and avoid them. Make sure there is nothing in the water
the diver may hit upon entry.
SECTION 7

MAINTENANCE

connector with a high-grade silicone grease.
®
- PLEASE NOTE -
! ! ! CAUTION ! ! !
12