Omnia 9sg Quick Start Setup Manual page 6

If you are using a processor that does not have such a patchpoint, the best performance will be realized
by using its HD output to feed Omnia.9sg. It will be necessary to adjust the "Input Gain" control on Omnia.
9sg to "0" as the HD output will not be pre-attenuated.
Finally, it is also possible to use a "flat" (non-pre-emphasized) FM output to feed Omnia.9sg or even a de-
emphasized FM output (with the final clipper drive of the processor turned all the way down) but this
output will have been clipped at 91%, defeating the headroom built into the Omnia.9sg's composite
embedder and consequently yielding the poorest results.
Configure the Output
Connect the audio outputs as appropriate for your installation. Omnia.9sg supports balanced professional
line-level analog audio via its Left and Right Analog Outputs and AES/EBU digital output on standard XLR
connectors via the AES output. The AES outputs can also be used to provide an Omnia Direct™
(composite over AES) signal. Two composite outputs are provided to feed a main/backup composite STL
or transmitter.
!
! 6