Table of Contents
Advertisement
Quick Links
Quick Reference Guide CLK-1
Legal Notices
This manual and any examples contained herein are provided "as is". JNC makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability, non-infringement and fitness for a particular purpose. JNC shall
not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this
manual or the examples contained herein.
Reproduction, adaptation or translation of this manual is prohibited without prior written permission of JNC Service B.V.
CAUTION: This Quick Reference Guide may be revised or withdrawn at any time without prior notice.
This document provides basic usage instructions and information on setting up your DOKKi docking station.
UNPACKING
Do NOT use a knife to open the package or contents as this may result in damage to the product(s)
Open the outer box on the top-side. Take the CLK-1 from it's box and remove
the bubble-foil.
BOX CONTENTS
CLK-1 docking station
•
Promotional items aren't listed here.
The insertion area is as tight as possible to ensure stability for the scanner. This
also means that the scanner won't fit when used in combination with any
available sleeve or case (rubber, leather, etc.).
By removing the USB cover from the scanner dust and/or moist can penetrate the connector and opening(s) behind
the USB cover more easily. It is possible that the products' IP rating has been altered too.
Removing any original part from the scanner could void warranty. Doing so is at your own risk!
The CLK-1 will fit Opticon scanner models OPH-3000 and CLK-3000 (also known as 'Opticon
SMART'). Before inserting any scanner in the dock be sure to remove the USB cover (if any).
Save the USB cover in case it's needed at a later stage.
POSITIONING
The CLK-1 has rubber feet on the bottom and can be used on a flat surface. Please make sure the CLK-1 is positioned on a firm
background which is level.
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
DOKKi
DOKKi CLK-1
.eu
CLK-1_QRG-001 / June 2014
Advertisement
Table of Contents
Related Manuals for Dokki.eu CLK-1
Summary of Contents for Dokki.eu CLK-1
- Page 1 Save the USB cover in case it's needed at a later stage. POSITIONING The CLK-1 has rubber feet on the bottom and can be used on a flat surface. Please make sure the CLK-1 is positioned on a firm background which is level.
- Page 2 COMMUNICATION AND CHARGING (MIXED) • You can also communicate with the PC through the CLK-1. For this connect the CLK-1 with an appropriate USB cable to a PC. Be aware that the cradle itself doesn't create it's own random Virtual Com Port (VCP)! DRIVER INSTALLATION FOR COMMUNICATION WITH PC –...
- Page 3 TROUBLESHOOTING If you are experiencing any problem with the CLK-1 the first thing to check is if the scanner operates correctly when connected directly to the PC with an USB cable. Do so by plugging the USB cable that came with your scanner into your scanner and make sure the other end of the USB cable goes directly into the PC (bypassing any present HUB).
Need help?
Do you have a question about the CLK-1 and is the answer not in the manual?
Questions and answers