Table of Contents
Advertisement
Quick Links
DOKKi
.eu
Quick Reference Guide CMT-30 (r2)
Legal Notices
This manual and any examples contained herein are provided "as is". JNC makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability, non-infringement and fitness for a particular purpose. JNC shall
not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this
manual or the examples contained herein.
Reproduction, adaptation or translation of this manual is prohibited without prior written permission of JNC Service B.V.
CAUTION: This Quick Reference Guide may be revised or withdrawn at any time without prior notice.
This document provides basic instructions for setting up your DOKKi docking cabinet.
UNPACKING
Do NOT use a knife to open the package or contents as this may result in damaging the product(s)!
Open the outer box on the top-side (indicated by the 'this way up" sign on the labels). Carefully lift the docking cabinet from it's box and
remove the bubble-foil.
REMOVING TRANSPORT TAPE
Several parts have been secured with orange tape, to prevent them
from moving during transport.
Locate and remove all the orange the tape gently and verify that
these parts are in their original operational position.
If not, re-fit or re-insert as necessary.
Orange transport tape
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CMT-30_QRG-003 / December 2014
Advertisement
Table of Contents
Related Manuals for Dokki.eu CMT-30
Summary of Contents for Dokki.eu CMT-30
- Page 1 Locate and remove all the orange the tape gently and verify that these parts are in their original operational position. If not, re-fit or re-insert as necessary. Orange transport tape DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved. CMT-30_QRG-003 / December 2014...
- Page 2 Other models (for example the OPN-2003 and OPN-2004) won't fit. Trying to insert unlisted models will result in damage to the docking cabinet and other scanner model! DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved. CMT-30_QRG-003 / December 2014...
- Page 3 Quick Reference Guide CMT-30 (r2) POSITIONING The CMT-30 has rubber feet on the bottom and can be used as a desk-stand , or it can be wall-mounted with the 'Wall Mount KIT' which is separately available as an accessory. Desk-stand Please make sure the CMT-30 is positioned on a firm background which is level.
- Page 4 Wall Mount Kit to securely mount the CMT-30 to a wall. • All (other) available accessories can be found on our website. DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved. CMT-30_QRG-003 / December 2014...
- Page 5 TROUBLESHOOTING If you are experiencing any problem with the CMT-30 the first thing to check is if the scanner operates correctly when connected directly to the PC with an USB cable. Do so by plugging the USB cable that came with your scanner into your scanner and make sure the other end of the USB cable goes directly into the PC (bypassing any present HUB).
Need help?
Do you have a question about the CMT-30 and is the answer not in the manual?
Questions and answers