SubGear XP-3G Manual page 27

To set the gas mixture, Subgear XP-3G must be in user mode (time of day display).
1. Push or
ppO
2
Max Operating
Depth MOD
Change the O % mix by
2
and (–)
3. Change the oxygen fraction in increments of 1% by pushing
XP-3G will display the current fraction of oxygen, the maximum partial pressure limit
(ppO max) and the MOD.
2
4. Confirm the selected percentage with
Change the ppO max by
2
5. By pushing or
oxygen down to 1.0bar. Subgear XP-3G will now display the corresponding MOD for the
new ppO max.
2
6. Confirm your ppO max settings with
2
NOTE:
• Without confirmation the display will disappear after 3 minutes and your entries will
not be accepted.
• Automatic reset of the O
between 1 and 48 hours or to "no reset" (default).
or
until the GAS 1 O menu appears.
2
max
2.
oxygen fraction of gas 1 by pushing
(+)
.
(+) and
(–)
you can change the ppO
.
% mix to 21% can be set with "set 1" ->84 or Dive.Log
2
diving with Subgear XP-3G
until
Confirm that you wish to change the
or
max for the chosen fraction of
2
.
. Subgear
25