Before First Use; Setting Weight, Step Length, Signal Tone Und Time - SmartLab Walk P+ User Manual

Before first use:

Before first using your smartLAB
button pressed for more than 3 seconds. The device will go on and enters the setting
mode.
The smartLAB
® walk P+ step counter has an automatic setup function (Heart Beat).
This way there is no need to setup the step counter manually. Please refer to Heart
Beat section for more details.

Setting weight, step length, signal tone und time:

Setting weight:
1. Press the "M/" button and choose between „kg" and „lb". In order to confirm
your choice, please press the „Disp/ Set" button.
2. After you chose your unit, the weight indicator will flash. Now you can enter your
personal body weight and confirm by pressing the "M/" button. The possible
weight range is between 30 and 200 kg.
walk P+ step counter, please hold the „Disp/Set"
®
29