Download Print this page

DeLonghi HTF3033 Instructions For Use Manual page 3

Fan heater

Advertisement

Thank you for choosing this De'Longhi appliance. To get
the very best out of your new appliance it is advisable to
read these instructions before using it. This will ensure that
you gain optimum results and use the appliance safely.
Voltage
Wattage
ELECTRICAL CONNECTION
-
Before inserting the plug in an electrical outlet, check carefully
to be certain that the voltage in your home's electrical system
matches the voltage indicated on the appliance and that the
socket and main feed are of a size sufficient to power this
appliance.
-
THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EEC
ON RADIO INTERFERENCE SUPPRESSION.
FUNCTIONING AND USE
-
Turn the thermostat dial (where included) in a clockwise
direction until it reaches the maximum setting.
-
Summer service (ventilation only): turn the function dial to
setting
. (the lamp will come on)
-
Heating at reduced power: turn the function dial to setting
1. (the lamp is on)
-
Heating at full power: turn the function dial to setting 2. (the
lamp is on)
-
Switching off: turn the function dial to setting 0.
It is always advisable to disconnect the plug when the appliance
is not in use.
ADJUSTING THE THERMOSTAT
When the room has reached the required temperature turn the
thermostat dial in an anti-clockwise direction up to the point where
the appliance switches off and not beyond. The temperature fixed in
this way will be automatically maintained and kept at a constant level
by the thermostat.
ANTIFREEZE SERVICE
Turn the function dial to setting 2, then turn the thermostat dial to
setting
. When it is set in this way the appliance keeps the room
at a temperature of approx. 5° C with minimal energy expenditure.
CLEANING AND MAINTENANCE
Before cleaning always remove the plug from the electrical socket.
Clean the air inlet/outlet grilles frequently with a vacuum cleaner.
Never use abrasive powders or solvents.
See rating label
3

Advertisement

loading