Download Print this page
DeLonghi HS Instructions Manual
DeLonghi HS Instructions Manual

DeLonghi HS Instructions Manual

Electric heating convector

Advertisement

Quick Links

ELECTRIC HEATING CONVECTOR

Advertisement

loading

Summary of Contents for DeLonghi HS

  • Page 1 ELECTRIC HEATING CONVECTOR...
  • Page 2 Fig.1 Fig.2 Fig.3 Fig.3 Fig.4...
  • Page 3: Wall Mounting

    Thank you for choosing this De’Longhi convector. To get the very best out of your new convector it is advisable to read these instructions before using it. This will ensure that you gain optimum results and use the appliance safely. Assembling the feet Fit the feet to the appliance as follows: - Insert the anchor pins into the slots and turn the foot until it...
  • Page 4 Operation and use Turning the appliance on Insert the plug into the mains socket and switch on. Models with only one switch Press the bottom of the switch down so the red area at the top of the switch is showing. Models with thermostat only Turn the appliance on by rotating the thermostat dial clockwise until it can be turned no further.
  • Page 5 - Do not block the outlet grilles at the top of the heater or the intake grille at the bottom of the heater. - The heater must be positioned at least 50cm from furniture or other objects. - If the power cable is damaged, it must be replaced by the manu- facturer or an authorised technical service centre.
  • Page 6 Electrical connection (U.K. only) A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead and an appropriate plug fitted, as below.