Attach Camera To Housing Tray; Installing Camera In Housing - Ikelite 6871.08 Instruction Manual

Attach Camera to Housing Tray

Position the camera and lens on the Camera Tray, and then secure it
with the mounting bolt which threads into the camera's tripod socket.
Use a flathead screwdriver (recommended) or coin to tighten the
mounting bolt so the camera bottom is flush against the tray.
Leveling Screw (Pre-adjusted)

Installing Camera in Housing

Before installing the camera, pull out on the controls in the front section of
the housing. This will allow the camera to slide in easier. Once the camera
is installed and the lid snaps have been closed, return the controls to their
operating position and check function.
CANON
EOS
7D
Mark II
Camera Tray
Mounting Bolt
11